General Discriptions

AlbaChem Premium Mist Adhesive is used to provide a temporary tack or permanent bond on a wide variety of substrates. It may be used to bond cloth, wood, film, plastic, cardboard and more. Premium Mist Adhesive sprays in a coarse mist pattern, to yield a strong tack with a low overspray.

• Super Strong
• Stable at High Temperature
• Less Frequent Re-application
• Does Not Contain any chlorinated solvents.
• Great for Screen Printing Applications.

Shake well before using. Make sure surfaces to be bonded are clean and dry. Hold can 6 to 8 inches from surface to be sprayed. Use a sweeping motion when spraying. For a temporary bond, spray Premium Mist onto one of the surfaces to be bonding only. Allow a few seconds for product to dry before put-ting the surfaces together. For a permanent bond, spray onto both surfaces that are being bonded. Immediately put the surfaces together, while the adhesive is still wet. To avoid clogging, after using, turn can upside down and spray against a piece of paper until a clean stream of airflows.

Directions for UseL
Packaging/Shipping Specifications:
Item No. Package Size Case Pack Case Weight Hazmat Information*
397 Gram. 14 oz. 12 cans 16 lbs. Consumer Commodity ORM-D
The shipping designation of Consumer Commodity ORM-D is only valid for shipments by ground with NAFTA (United States, Canada and Mexico). Air shipments to any location
domestic or international) and ALL shipments outside of NAFTA require
flammable gas labeling. The proper shipping name is: Flammable nay 2.1, UN 1950
Appearance: Light amber liquid in aerosol can.
Solubility In Water Slightly soluble
Odor. Mild hydrocarbon odor
Chemical Family. Synthetic rubber dissolved In hydrocarbon/ketone blend with a hydrocarbon propellant
Environmental
Volatile Organic Compound (VOC): Under 65% VOC's. This product is compliant for all users of aerosol spot removers in the United States, Hazardous Air Pollutant (HAP): No
Ozone Depleting Substance: No
SARA 313 Chemicals: No
Consult material safety data sheet for all safety and handling information.